Skip to content

Learn about Kevinbot P2 Board

The Kevinbot P2 Board is a Parallax Propeller 2 Edge Breakout Board catered for robotics use. Originally designed only for use in Kevinbot v3, the board can be used for any P2-based robotics project.

Specifications

  • Compatible with standard P2 Edge (will not work with the 32 MB option)
  • Prop-Plug Programming Interface
  • 32 Servo Outputs
  • Four One-Wire Ports
  • Four I2C Ports
  • One Serial UART Port
  • One RSL (Status Light) Port
  • Two Voltmeters (1v ~ 33v)
  • One Level-Shifted WS281X(b) port
  • Four 2x6 Way P2 accessory headers
  • Internal and External Error Buzzer
  • Reset Button and External Reset button port
  • Internal DS18b20 thermometer
  • Fully Open Source Design

License

All hardware is licensed under the CERN-OHL-S-2.0 license. Documentation and media (images) are licensed under a CC-BY-SA-4.0 license.

PCBWay

PCBWay

Thanks to PCBWay for providing high-quality and fast PCB prototypes.

I would recommend them for any of your PCB needs. They offer fast turnaround and shipping.

Get a Quote Here for as low as $5

pcb edges Kevinbot P2 Board pcb